Skip to content

Material


Materials are properties that can change the look of your object. For precise control over the object's painting, see the Vertex Paint options;

At the moment, each object has its own material, two objects cannot share the same material.

Opacity mode

Opaque

The default mode and the fastest.

Blending

You can make your mesh semi-transparent with this slider. Note that because of real-time constraints, you can have noticeable visual artifacts in some cases if your object has a complex shape.

Refraction

This mode can be used to simulate glass material. Because of real time constraints, self-refraction and multi-layered refraction is somewhat limited.

The roughness painting of the model impacts how blurry the refraction is. By default, every object created in Nomad has a roughness slightly around 25%, thus the refraction won't be perfect but a bit blurry. You can use the paint glossy button to repaint your model with a roughness and metalness of 0 (the colors won't be affected).

There are 2 different roughness at play, the one driving how blurry the reflection is on the surface, and the other one driving the interior (refraction).
However, since there is only one painting roughness channel in Nomad, both interior and exterior roughness will share the same value.
In order to have different values (for example a lollipop with sharp surface but blurry interior) you use the sliders Surface glossiness and Interior roughness to override the painted roughness.

Subsurface

This mode can simulate materail that allows light to bleed through it, like skin, wax, jade.

To get the best result, switch to PBR shading mode and use at least one directional light, ideally with a dim environment.

Depth controls how far light scatters from the front, to under the surface, then out the front surface again. This has the effect of softening hard shadows, and blurring surface detail.

Translucency controls how light scatters from the front to the back of a shape, like like scattering through the underside of a leaf, or when ears are strongly backlit.

Additive

You can make your mesh semi-transparent with this slider.

You can set an opacity value higher than 1, which means the object will be brighter.
It can be useful if you want to use bloom and the threshold parameter to only make this object glow like an emissive object.

This mode tends to have less artifacts than Blending (order independent transparency).

Dithering

Make the object semi-transparent by discarding some pixels in a random fashion.

Reflectance

Controls the amount of reflection the material will receive for non-metallic materials. Most of the time the default value should be used (which corresponds to the standard 4% reflected lght at normal angle), but can be increased to boost reflections and highlights in a characters eyes, for example.

Always unlit

If enabled, the object will ignore PBR and Matcap and simply display its color painting without shading. Note that if you use Additive, you can paint transparency directly by using black color.

Smooth Shading

See the global option.
Auto value will use the global option.

Two sided

See the global option.
Auto value will use the global option.

Casts shadows

For now Auto is the same as On. Transparent objects also cast shadows (in a dithering pattern to emulate blended shadows).
Make sure to disable shadow casting if you have a big object in your scene that doesn't need to cast shadows (for example a big floor).

Wireframe

See the global option.
Auto value will use the global option.

Inverse culling

Reverse the normals of a surface. Usually not required, but can be used if a model appears inside out, or in combination with Two sided disabled, can be used to make interiors where the wall nearest the camera is always hidden.

Textures

If an object has UVs, then textures can be applied to the material in addition to the vertex color/roughness/metalness. Usually these are the result of a texture bake, but images created outside of Nomad can also be used.

Textures can be applied to

  • Color
  • Normal
  • Roughness
  • Metalness
  • Opacity
  • Emissive

Clicking on a texture slot will bring up a selector. After a texture has been assigned to a material slot, clicking again will bring up a texture panel:

Open

Select another texture

None

Remove the texture

Filtering

The texture filter method to use, Auto is the default, methods are Nearest, Linear, Mipmap. Nearest does no filtering, so textures can get jagged artifacts when viewed up close. Linear and Mipmap do better filtering, so textures appear blurred rather than jagged up close.

Tiling-X

If the Scale parameter is greater than 1, making the texture smaller than the object UVs, how will the texture be tiled along the X axis. None means no repeats. Repeat will do copies of the texture. Mirror will do copies of the texture, with every second copy reversed, which can help hide tiling artifacts.

Tiling-Y

Same as Tiling-X, but for the Y axis.

Transform

Extra 2d transformations applied to the texture in UV space. The reset button resets to defaults, the chain icon (when textures other than color are selected) will link or unlink the transform to be the same as the color texture.

Translation

The X and Y offset of the texture

Rotation

The rotation of the texture

Scale

The scale of the texture, bigger numbers will make the texture smaller on the object, use the Tiling-X and Tiling-Y sliders to control what happens.

Uniform scale

When turned off Nomad will show separate controls for Scale-X and Scale-Y.